移动版

主页 > K彩系列 >

Yamaha专业音响(6)

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms. 
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.) 
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD) 
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) 
*4 Phone Jacks are unbalanced. 
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND) 
*6 XLR-3-31 type connectors is unbalanced.

Analog output specifications Output terminal Actual source 
impedance For use with 
nominal Output level Connector
Nominal Max. before clip
ST OUT [L,R]   75Ω   600Ω Lines   +4 dBu 
(1.23 V)
  +24 dBu 
(12.3 V)
  XLR3-32 type*1
Phone jack*4
 
MONO OUT   75Ω   600Ω Lines   +4 dBu 
(1.23 V)
  +24 dBu 
(12.3 V)
  XLR3-32 type*1  
GROUP OUT (1-4)   150Ω   10kΩ Lines   +4 dBu 
(1.23 V)
  +20 dBu 
(7.75 V)
  Phone jack*2  
AUX SEND (1-6)   75Ω   600Ω Lines   +4 dBu 
(1.23 V)
  +24 dBu 
(12.3 V)
  XLR3-32 type*1  
MATRIX OUT (1, 2)   150Ω   10kΩ Lines   +4 dBu 
(1.23 V)
  +20 dBu 
(7.75 V)
  Phone jack*2  
MONO CH INSERT OUT 
MGP32X: 1–24 
MGP24X: 1–16
  75Ω   10kΩ Lines   0 dBu 
(0.775 V)
  +20 dBu 
(7.75 V)
  Phone jack*3  
ST CH INSERT OUT [L,R]   75Ω   10kΩ Lines   0 dBu 
(0.775 V)
  +20 dBu 
(7.75 V)
  Phone jack*3  
MONITOR OUT [L,R]   150Ω   10kΩ Lines   +4 dBu 
(1.23 V)
  +20 dBu 
(7.75 V)
  Phone jack*2  
PHONES OUT   150Ω   40Ω Phones   3mW   75mW   ST Phone Jack  

0 dBu=0.775 Vrms, 0 dBV=1 Vrms 
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) 
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) 
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND) 
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)

http://www.caogenz.com/abvJF6R9UF/0944331773.html (责任编辑:admin)
Copyright © 2011 - 2016 版权所有 All Rights Reserved